Project_Detail
All_Projects

DM32-Multimode

Early beta for unified conventional P25 Phase 1, DMR and analog FM on the DM-32UV.

View on GitHub
README.md

DM32 Multimode

P25, DMR and analog FM in one firmware for the Baofeng DM-32UV.

DM32 Multimode is an independent, experimental project for amateur radio, education and academic research. It replaces the radio's factory software and adds a browser-based programming tool called DM32 Studio.

This is beta software. Do not rely on it for emergency, life-safety, public-safety or other mission-critical communications. Features may have faults, miss calls or stop working unexpectedly. Keep a proven radio available for communications you must be able to depend on.

Start here

What would you like to do? Open this
Install the firmware or update an existing beta Installation instructions
Use the browser installer Firmware installer
Program channels and radio settings DM32 Studio CPS
Learn the buttons, menus and everyday controls Quick start
Check a problem or limitation Known issues
Return to your original firmware Recovery instructions

Current release and compatible radios

Item Details
Latest beta v0.3.0-beta.2
Build shown on the radio e799c73
Intended radio Classic DM-32UV / DM32 hardware with a supported original codec
Currently incompatible RF-B / DM32.NRFB.01.050 variants; support is planned

Do not assume every radio sold as a DM32 has the same hardware. The installation tools check model identification and the original backup's codec; those checks do not qualify every hardware revision. If an unsupported radio or codec is reported, stop and ask for help rather than forcing the installation.

The codec is the radio's digital voice software. It is not distributed in this repository. The installer uses the correct copy from your own original backup of that same physical radio to prepare the update locally. Never use another radio's backup or calibration files.

See the release notes for changes and testing details. Older releases remain available in the firmware folder.

Your first installation, in plain language

  1. Check compatibility and read the instructions. Have a charged battery, the correct USB programming cable and a reliable USB connection. The installation guide explains both browser and command-line routes.
  2. Keep your original backup safe. First-time installation needs an original backup. If you already have a verified, sealed backup for this radio, reuse it. Keep a second copy somewhere safe; it is your route back to the original firmware.
  3. Save your settings before updating. If you already run this beta, use DM32 Studio to read the radio and export the complete JSON file. A channel CSV file is not a complete backup. Keep older JSON files for returning to an earlier version. Our CPS does not read the factory firmware's settings.
  4. Follow the installer prompts. Do not flash the bare application file by itself. The preparation step combines it with your radio's own codec. Opening the CPS does not automatically install firmware.
  5. Program your own channels and radio ID. The supplied defaults are examples, not a ready-to-transmit setup. Check frequencies, mode, power, receive filters and transmit permission before making a call. Stock codeplugs are not imported automatically.
  6. Disconnect the programming cable for normal audio. Close the serial connection and remove the plug from the radio. That plug changes the internal microphone and speaker routing. Start by listening to a known signal, then make a short, authorized test call.

The quick start explains normal operation after installation. The CPS guide explains programming and saving your settings.

What the beta offers

Feature What it does
P25 Phase 1, DMR and analog FM Use conventional digital or analog channels in the same firmware
256 channel memories Store named channels and organize them into 16 zones
Channel and talkgroup scanning Use 16 scan lists; P25 talkgroup lists can monitor up to 64 groups on one frequency
Contacts and call information Store 96 contacts and show names and received-call details
Messaging Send and receive supported P25/DMR text messages; see messaging details and limits
P25 trunking Store eight named systems with up to eight control-channel frequencies each; see the limits below
Installable applets Load small, bounded programs such as Counter and SAME Watch; see the applet guide
Everyday controls Frequency/channel modes, keypad lock, display timers, microphone gain, channel power and an adjustable transmit timeout

The two A/B selections share one receiver. They do not receive two channels at the same time. Power labels, battery icons and signal bars are approximate; they are not calibrated test instruments.

P25 trunking: experimental

Trunking follows a system's control channel to find an assigned voice channel. This beta supports clear P25 Phase 1 C4FM group calls. It offers separate receive-only and experimental subscriber modes.

For listening, leave Do not affiliate (receive only) checked in DM32 Studio. The radio can follow calls without registering, affiliating or transmitting. New systems use this setting; existing systems keep the mode you saved.

This update improves control-channel decoding, search and recovery after a temporary receive failure. It keeps the same V6 settings format as beta.1. The new receive changes have host tests and a processor build; they still need feedback from radios listening to actual systems.

Subscriber mode can send registration, affiliation and channel requests. Use it only on a system whose operator has explicitly authorized your radio and testing. It is not a way to gain access to someone else's network.

Local tests have demonstrated registration, affiliation, granted voice calls and incoming call following. Precise radio-frequency access-slot timing and operation on arbitrary production systems have not been qualified. Phase 2, CQPSK, multi-site roaming and encrypted voice are not supported. Encrypted calls remain muted; this project does not provide decryption.

Read the trunking guide and known issues before enabling it. Messaging, scanning, applets and hardware variants also need broader beta feedback. SAME Watch is experimental and must not be relied on for weather warnings or emergency alerts.

Responsible use and disclaimer

This project is provided for experimental, educational, academic and amateur radio use. It is independent community work, not factory firmware or a manufacturer-approved product.

You are responsible for your equipment, backups, configuration and operation. Transmit only where your license and applicable rules allow, and use repeaters or networks only with the required authorization. A frequency being selectable, a signal being receivable, or a feature being present does not grant permission to transmit, register or affiliate. Do not use this project for interference, impersonation, unauthorized system access or other unlawful activity.

Use at your own risk. Firmware changes can cause lost settings, unreliable operation or a radio that needs recovery. The software and documentation are provided "as is," without warranty, including any warranty of fitness for a particular purpose. To the extent permitted by applicable law, the maintainers and contributors accept no responsibility or liability for equipment damage, data loss, interference, unlawful use, injury or other loss arising from use or misuse of this project. You remain responsible for how you use it.

These notices do not replace or change the applicable software licenses. See source and build information, third-party notices and included licenses.

Help and beta feedback

Found a problem? Check known issues, then follow the feedback guide or open a bug report. Include the firmware build, radio mode, what you expected and what happened. One clear description is useful; repeated testing is not required.

Thanks and acknowledgments

Thank you to the authors, maintainers and contributors of the projects that made this work possible:

  • RadioFoundry — hardware support, drivers, the native DMR stack, firmware tools and browser programming/flashing code and design.
  • IMBE Vocoder — the fixed-point IMBE voice codec used for P25, including the work of Pavel Yazev and other upstream contributors.
  • FreeRTOS Kernel — the embedded operating-system kernel.
  • OP25 — P25 framing and protocol references and the basis for derived test vectors.
  • MMDVM — DMR/P25 reference code and synthetic test fixtures, along with the wider MMDVM community's radio-testing tools.
  • GCC, GNU Binutils and Newlib — the compiler, build tools and runtime libraries.

For protocol research and laboratory testing, thanks also to:

  • SiteSim — the trunking lab controller and system-testing reference.
  • MMDVM_HS and MMDVMHost — hotspot platforms, protocol references and independent decoding/diagnostic tools.
  • QuantarBridge — a P25 messaging protocol and interoperability reference.

Thanks also to the beta testers and fellow hams who have shared observations, reported bugs and helped improve the radio.

Original credits and license notices remain with their respective code. See third-party notices and source information for the included components and their exact revisions.