🐚 ShellHop Live Builder

Automatically build an AntiX Live ISO that boots directly into ShellHop.

This project wraps a Docker container and live-build setup to generate a live ISO that:

• Boots AntiX-23.2_x64-Core (or another base if you so desire)
• Autostarts shellhop-client at startup
• Connects to one of your configured relay nodes
• Is fully customizable and reproducible

ShellHop Live is a minimal antiX-based ISO builder that creates a live environment where users boot directly into your shellhop-client---no installation, no persistence, no disk writes.

This system is designed for total isolation:

• No trace is left on the host machine.

• Your relay nodes are used directly via your custom shellhop-client.

• Ideal for censorship avoidance, hardened environments, or quick jump-box setups.

• 🐧 Boots into antiX 23.2 Core

• ⚡ Autostarts shellhop-client immediately after boot

• 🔒 Supports relay hopping for secure and anonymous SSH routing

• 💾 Leaves no trace: RAM-only session, shuts down on exit

• 💡 Easy to modify or rebuild with your own client or config

Make sure your working directory includes:

• A statically compiled shellhop-client binary from TransIRC/ShellHop

• The source ISO (defaults to antiX 23.2 Core)

You can get the tested base ISO here:
antiX-23.2_386-core.iso

💡 You can experiment with other Debian/antiX-based minimal ISOs by adjusting entrypoint.sh.

To build your custom ShellHop Live ISO:

Simply run: ./build-rundocker.sh